NekBinnedVolumeIntegral

Compute the spatially-binned volume integral of a field over the NekRS mesh

Description

This user objects performs a volume integral of a specified field over bins defined on the NekRS mesh. For a bin on , the user object value in that bin is

where is the value of the user object in bin and is the specified field. To be clear, this user object is not evaluated on the NekRSMesh mesh mirror, but instead on the mesh actually used for computation in NekRS.

The field is specified with the field parameter, which may be one of:

  • pressure

  • temperature

  • velocity (magnitude of velocity)

  • velocity_x (-component of velocity)

  • velocity_y (-component of velocity)

  • velocity_z (-component of velocity)

  • velocity_component (velocity vector projected onto another vector)

  • scalar01

  • scalar02

  • scalar03

  • unity

Setting field = unity is equivalent to computing the volume.

When using field = velocity_component, the manner in which the velocity direction is selected is given by the velocity_component parameter, which may be one of:

  • normal: normal to the face bins (only valid for the side binning user objects)

  • user: arbitrary user-specified direction, provided with the velocity_direction parameter

When using a velocity component as the field, this user object computes the dot product of the velocity with the specified direction. To retain the components of the dot product, such as for visualizing vector glyphs of the user object result in Paraview, you can use a NekSpatialBinComponentAux.

If running NekRS in non-dimensional form (and you have indicated the appropriate nondimensional scales by setting nondimensional = true for the [Problem], then the value of this postprocessor is shown in dimensional units. On the otherhand, NekRS scalars (scalar01, scalar02 or scalar03) are never dimensionalized because their dimensions are problem-dependent.

The bins are specified by providing a list of binning user objects with the bin parameter. Available user objects for specifying spatial bins are:

If more than one bin is provided, then the bins are taken as the product of each individual bin distribution.

Example Input Syntax

As an example, the input below defines three individual bin distributions (named x_bins, y_bins, and z_bins to represent 1-D binning in each coordinate direction). These bins are then combined to integrate over the NekRS mesh in equal-size spatial bins.

[UserObjects]
  [x_bins]
    type = LayeredBin
    direction = x
    num_layers = 3
  []
  [y_bins]
    type = LayeredBin
    direction = y
    num_layers = 3
  []
  [z_bins]
    type = LayeredBin
    direction = z
    num_layers = 12
  []
  [vol_integral]
    type = NekBinnedVolumeIntegral
    bins = 'x_bins y_bins z_bins'
    field = unity
  []
  [avg_p]
    type = NekBinnedVolumeAverage
    bins = 'x_bins y_bins z_bins'
    field = pressure
  []

  [one_bin]
    type = LayeredBin
    direction = z
    num_layers = 1
  []
  [reference_vol_integral]
    type = NekBinnedVolumeIntegral
    bins = 'one_bin'
    field = unity
  []
  [reference_pressure_avg]
    type = NekBinnedVolumeAverage
    bins = 'one_bin'
    field = pressure
  []
[]
(test/tests/userobjects/layered_layered/nek.i)

The result of the user object can then be visualized with a SpatialUserObjectAux.

Input Parameters

  • binsUserobjects providing a spatial bin given a point

    C++ Type:std::vector<UserObjectName>

    Controllable:No

    Description:Userobjects providing a spatial bin given a point

  • fieldField to postprocess

    C++ Type:MooseEnum

    Options:velocity_component, velocity_x, velocity_y, velocity_z, velocity, temperature, pressure, scalar01, scalar02, scalar03, unity

    Controllable:No

    Description:Field to postprocess

Required Parameters

  • check_zero_contributionsTrueWhether to throw an error if no GLL points/element centroids in the NekRS mesh map to a spatial bin; this can be used to ensure that the bins are sufficiently big to get at least one contributing point from the NekRS mesh.

    Default:True

    C++ Type:bool

    Controllable:No

    Description:Whether to throw an error if no GLL points/element centroids in the NekRS mesh map to a spatial bin; this can be used to ensure that the bins are sufficiently big to get at least one contributing point from the NekRS mesh.

  • execute_onTIMESTEP_ENDThe list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, POSTCHECK, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, FINAL, CUSTOM.

    Default:TIMESTEP_END

    C++ Type:ExecFlagEnum

    Options:NONE, INITIAL, LINEAR, NONLINEAR, POSTCHECK, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, FINAL, CUSTOM

    Controllable:No

    Description:The list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, POSTCHECK, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, FINAL, CUSTOM.

  • interval1Frequency (in number of time steps) with which to execute this user object; because Nek uses very small time steps, you need many time steps to reach steady state, and user objects can be expensive and not necessary to evaluate on every single time step. NOTE: you probably want to match this 'interval' in the Output

    Default:1

    C++ Type:unsigned int

    Controllable:No

    Description:Frequency (in number of time steps) with which to execute this user object; because Nek uses very small time steps, you need many time steps to reach steady state, and user objects can be expensive and not necessary to evaluate on every single time step. NOTE: you probably want to match this 'interval' in the Output

  • map_space_by_qpFalseWhether to map the NekRS spatial domain to a bin according to the element centroids (true) or quadrature point locations (false).

    Default:False

    C++ Type:bool

    Controllable:No

    Description:Whether to map the NekRS spatial domain to a bin according to the element centroids (true) or quadrature point locations (false).

  • prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.

    C++ Type:MaterialPropertyName

    Controllable:No

    Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.

  • use_interpolated_stateFalseFor the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.

    Default:False

    C++ Type:bool

    Controllable:No

    Description:For the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.

  • velocity_componentDirection with which to evaluate velocity when 'field = velocity_component.' Options: user (specify a direction with 'velocity_direction'), normal (normal to side bins)

    C++ Type:MooseEnum

    Options:normal, user

    Controllable:No

    Description:Direction with which to evaluate velocity when 'field = velocity_component.' Options: user (specify a direction with 'velocity_direction'), normal (normal to side bins)

  • velocity_directionDirection in which to evaluate velocity, for 'field = velocity_component'. For example, velocity_direction = '1 0 0' will get the x-component of velocity.

    C++ Type:libMesh::Point

    Controllable:No

    Description:Direction in which to evaluate velocity, for 'field = velocity_component'. For example, velocity_direction = '1 0 0' will get the x-component of velocity.

Optional Parameters

  • allow_duplicate_execution_on_initialFalseIn the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).

    Default:False

    C++ Type:bool

    Controllable:No

    Description:In the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).

  • control_tagsAdds user-defined labels for accessing object parameters via control logic.

    C++ Type:std::vector<std::string>

    Controllable:No

    Description:Adds user-defined labels for accessing object parameters via control logic.

  • enableTrueSet the enabled status of the MooseObject.

    Default:True

    C++ Type:bool

    Controllable:Yes

    Description:Set the enabled status of the MooseObject.

  • execution_order_group0Execution order groups are executed in increasing order (e.g., the lowest number is executed first). Note that negative group numbers may be used to execute groups before the default (0) group. Please refer to the user object documentation for ordering of user object execution within a group.

    Default:0

    C++ Type:int

    Controllable:No

    Description:Execution order groups are executed in increasing order (e.g., the lowest number is executed first). Note that negative group numbers may be used to execute groups before the default (0) group. Please refer to the user object documentation for ordering of user object execution within a group.

  • force_postauxFalseForces the UserObject to be executed in POSTAUX

    Default:False

    C++ Type:bool

    Controllable:No

    Description:Forces the UserObject to be executed in POSTAUX

  • force_preauxFalseForces the UserObject to be executed in PREAUX

    Default:False

    C++ Type:bool

    Controllable:No

    Description:Forces the UserObject to be executed in PREAUX

  • force_preicFalseForces the UserObject to be executed in PREIC during initial setup

    Default:False

    C++ Type:bool

    Controllable:No

    Description:Forces the UserObject to be executed in PREIC during initial setup

  • use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

    Default:False

    C++ Type:bool

    Controllable:No

    Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

Advanced Parameters

Input Files

Child Objects