- ACross-sectional area of connected flow channels
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:Cross-sectional area of connected flow channels
- A_refReference area [m^2]
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Reference area [m^2]
- KForm loss coefficient [-]
C++ Type:double
Unit:(no unit assumed)
Controllable:Yes
Description:Form loss coefficient [-]
- boundaryThe list of boundary IDs from the mesh where this object applies
C++ Type:std::vector<BoundaryName>
Unit:(no unit assumed)
Controllable:No
Description:The list of boundary IDs from the mesh where this object applies
- fpFluid properties user object name
C++ Type:UserObjectName
Unit:(no unit assumed)
Controllable:No
Description:Fluid properties user object name
- gravity_magnitudeGravity constant, [m/s^2]
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Gravity constant, [m/s^2]
- headPump head, [m]
C++ Type:double
Unit:(no unit assumed)
Controllable:Yes
Description:Pump head, [m]
- normalsFlow channel outward normals or junction inward normals
C++ Type:std::vector<double>
Unit:(no unit assumed)
Controllable:No
Description:Flow channel outward normals or junction inward normals
- numerical_flux_namesThe names of the user objects that compute the numerical flux at each flow channel.
C++ Type:std::vector<UserObjectName>
Unit:(no unit assumed)
Controllable:No
Description:The names of the user objects that compute the numerical flux at each flow channel.
- rhoArho*A of the connected flow channels
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:rho*A of the connected flow channels
- rhoEArhoE*A of the connected flow channels
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:rhoE*A of the connected flow channels
- rhoEVrho*E*V of the junction
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:rho*E*V of the junction
- rhoVrho*V of the junction
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:rho*V of the junction
- rhouArhou*A of the connected flow channels
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:rhou*A of the connected flow channels
- rhouVrho*u*V of the junction
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:rho*u*V of the junction
- rhovVrho*v*V of the junction
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:rho*v*V of the junction
- rhowVrho*w*V of the junction
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:rho*w*V of the junction
- volumeVolume of the junction
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Volume of the junction
ADPump1PhaseUserObject
Computes and caches flux and residual vectors for a 1-phase pump
This user object is used with the Pump1Phase component. It computes the fluxes that are used in ADVolumeJunction1PhaseBC for the two connected flow channels and the residuals that are used in ADVolumeJunctionAdvectionScalarKernel for each of the pump's scalar degrees of freedom. It also adds both a momentum and energy source term due to the user supplied pump head.
Input Parameters
- apply_velocity_scalingFalseSet to true to apply the scaling to the normal velocity. See documentation for more information.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Set to true to apply the scaling to the normal velocity. See documentation for more information.
- execute_onTIMESTEP_ENDThe list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
Default:TIMESTEP_END
C++ Type:ExecFlagEnum
Unit:(no unit assumed)
Controllable:No
Description:The list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
- junction_subdomain_id65535Junction subdomain ID (required if 'use_scalar_variables' is 'false')
Default:65535
C++ Type:unsigned short
Unit:(no unit assumed)
Controllable:No
Description:Junction subdomain ID (required if 'use_scalar_variables' is 'false')
- processor_idsProcessor IDs owning each connected flow channel element
C++ Type:std::vector<unsigned int>
Unit:(no unit assumed)
Controllable:No
Description:Processor IDs owning each connected flow channel element
- prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
- use_interpolated_stateFalseFor the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:For the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
- use_scalar_variablesTrueTrue if the junction variables are scalar variables
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:True if the junction variables are scalar variables
Optional Parameters
- allow_duplicate_execution_on_initialFalseIn the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:In the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Unit:(no unit assumed)
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:Yes
Description:Set the enabled status of the MooseObject.
- execution_order_group0Execution order groups are executed in increasing order (e.g., the lowest number is executed first). Note that negative group numbers may be used to execute groups before the default (0) group. Please refer to the user object documentation for ordering of user object execution within a group.
Default:0
C++ Type:int
Unit:(no unit assumed)
Controllable:No
Description:Execution order groups are executed in increasing order (e.g., the lowest number is executed first). Note that negative group numbers may be used to execute groups before the default (0) group. Please refer to the user object documentation for ordering of user object execution within a group.
- force_postauxFalseForces the UserObject to be executed in POSTAUX
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Forces the UserObject to be executed in POSTAUX
- force_preauxFalseForces the UserObject to be executed in PREAUX
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Forces the UserObject to be executed in PREAUX
- force_preicFalseForces the UserObject to be executed in PREIC during initial setup
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Forces the UserObject to be executed in PREIC during initial setup
- use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.