RhoEAFromPressureTemperatureVelocityIC

Set the initial condition for rho*E*A from pressure, temperature and a scalarfield velocity variable

The cross-sectional area variable, "A", is usually set by the Component.

commentnote

This initial condition is usually added to the Simulation by the FlowModel, based on the parameters passed to each Component.

Input Parameters

  • ACross-sectional area

    C++ Type:std::vector<VariableName>

    Unit:(no unit assumed)

    Controllable:No

    Description:Cross-sectional area

  • TThe temperature

    C++ Type:std::vector<VariableName>

    Unit:(no unit assumed)

    Controllable:No

    Description:The temperature

  • fpThe name of fluid properties object to use.

    C++ Type:UserObjectName

    Unit:(no unit assumed)

    Controllable:No

    Description:The name of fluid properties object to use.

  • pThe pressure

    C++ Type:std::vector<VariableName>

    Unit:(no unit assumed)

    Controllable:No

    Description:The pressure

  • variableThe variable this initial condition is supposed to provide values for.

    C++ Type:VariableName

    Unit:(no unit assumed)

    Controllable:No

    Description:The variable this initial condition is supposed to provide values for.

  • velThe velocity

    C++ Type:std::vector<VariableName>

    Unit:(no unit assumed)

    Controllable:No

    Description:The velocity

Required Parameters

  • blockThe list of blocks (ids or names) that this object will be applied

    C++ Type:std::vector<SubdomainName>

    Unit:(no unit assumed)

    Controllable:No

    Description:The list of blocks (ids or names) that this object will be applied

  • boundaryThe list of boundaries (ids or names) from the mesh where this object applies

    C++ Type:std::vector<BoundaryName>

    Unit:(no unit assumed)

    Controllable:No

    Description:The list of boundaries (ids or names) from the mesh where this object applies

  • prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.

    C++ Type:MaterialPropertyName

    Unit:(no unit assumed)

    Controllable:No

    Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.

  • use_interpolated_stateFalseFor the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.

    Default:False

    C++ Type:bool

    Unit:(no unit assumed)

    Controllable:No

    Description:For the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.

Optional Parameters

  • control_tagsAdds user-defined labels for accessing object parameters via control logic.

    C++ Type:std::vector<std::string>

    Unit:(no unit assumed)

    Controllable:No

    Description:Adds user-defined labels for accessing object parameters via control logic.

  • enableTrueSet the enabled status of the MooseObject.

    Default:True

    C++ Type:bool

    Unit:(no unit assumed)

    Controllable:No

    Description:Set the enabled status of the MooseObject.

  • ignore_uo_dependencyFalseWhen set to true, a UserObject retrieved by this IC will not be executed before the this IC

    Default:False

    C++ Type:bool

    Unit:(no unit assumed)

    Controllable:No

    Description:When set to true, a UserObject retrieved by this IC will not be executed before the this IC

Advanced Parameters