- D_hHydraulic diameter
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:Hydraulic diameter
- eSpecific internal energy
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:Specific internal energy
- fpThe name of the user object with fluid properties
C++ Type:UserObjectName
Unit:(no unit assumed)
Controllable:No
Description:The name of the user object with fluid properties
- rhoDensity of the phase
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:Density of the phase
- vSpecific volume
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:Specific volume
- variableThe name of the variable that this object applies to
C++ Type:AuxVariableName
Unit:(no unit assumed)
Controllable:No
Description:The name of the variable that this object applies to
- velComponent of phase velocity aligned with the flow
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:Component of phase velocity aligned with the flow
ReynoldsNumberAux
Computes the Reynolds number.
The Reynolds number is computed as:
where is the phase volume fraction, the density, the absolute value of the component of the phase velocity that is aligned with the flow and the dynamic viscosity.
This object is for use with the conserved variable set. To use temperature and pressure, consider using the ReynoldsNumberFunctorAux.
, , and are variables declared when using a single-phase component.
Input Parameters
- alpha1.0Volume fraction of the phase
Default:1.0
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:Volume fraction of the phase
- blockThe list of blocks (ids or names) that this object will be applied
C++ Type:std::vector<SubdomainName>
Unit:(no unit assumed)
Controllable:No
Description:The list of blocks (ids or names) that this object will be applied
- boundaryThe list of boundaries (ids or names) from the mesh where this object applies
C++ Type:std::vector<BoundaryName>
Unit:(no unit assumed)
Controllable:No
Description:The list of boundaries (ids or names) from the mesh where this object applies
- check_boundary_restrictedTrueWhether to check for multiple element sides on the boundary in the case of a boundary restricted, element aux variable. Setting this to false will allow contribution to a single element's elemental value(s) from multiple boundary sides on the same element (example: when the restricted boundary exists on two or more sides of an element, such as at a corner of a mesh
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Whether to check for multiple element sides on the boundary in the case of a boundary restricted, element aux variable. Setting this to false will allow contribution to a single element's elemental value(s) from multiple boundary sides on the same element (example: when the restricted boundary exists on two or more sides of an element, such as at a corner of a mesh
- execute_onLINEAR TIMESTEP_ENDThe list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
Default:LINEAR TIMESTEP_END
C++ Type:ExecFlagEnum
Unit:(no unit assumed)
Controllable:No
Description:The list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
- prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
- use_interpolated_stateFalseFor the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:For the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Optional Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Unit:(no unit assumed)
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:Yes
Description:Set the enabled status of the MooseObject.
- seed0The seed for the master random number generator
Default:0
C++ Type:unsigned int
Unit:(no unit assumed)
Controllable:No
Description:The seed for the master random number generator
- use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.